Introduction

At first use of CC-CAM, your firewall may display :

-A window asking you if you allow CCCAMmail to communicate with the Internet.

-Another window, asking you if you allow CCCAMftp to communicate with the Internet.

It is important to allow both, otherwise CC-CAM will do not work.

Common control of CC-CAM.

1 Enable and disables the camera or webcam.

2 Indicates the state of alarm and surveillance.

3 Enable and disables the alarm.

4 Enable and disables Active surveillance ftp.

5 Sensitivity threshold.

6 Switches between the feature pages.

Starting C-CAM.

Place the camera in front of the area you want to monitor, then click on "Camera on" (Button 1). The monitor window will appear and the sensitivity treshold (Bar 5) will adjust itself. It is important to do not move camera during adjustment. The green color of sensitivity bar indicates optimal accuracy.

Starting alarm mode.

Select the operations that must be executed in case of intrusion on the "Monitor" pannel (Button 6)

Available operations:

             - Audible alarm.

             - Recording photos on hard disk.

             - Sending email alert containing photo.

             - Sending email alert without photos

When selected click on the button "alarm" (button 3). This will start the alarm mode.

Starting FTP mode.

Before using this feature you need to configure your FTP parameters. See the FTP panel of CC-CAM (Button 6).

Click on the button "Live Cam" (Button 4). This will create web page and send it on your website. From it, you can view the image from the camera.

FTP mode + alarm mode.

If alarm and FTP modes are activated CC-CAM will send photos of the intruder on your website. These ones can be viewed from a second HTML page (by clicking on the link  "List of intrusions" on the live cam page.

Limited area detection.

You can reduce the detection area by drawing a rectangle with the mouse on the image of the camera. To erase the limited area do a simple click on the screen.